Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Optogain USA. Riser- Riser rated fiber optic cable (NEC 770 OFNR ). Riser is the standard as described in NEC770 for OFNR fiber optic cables and fiber optic patch cords that are intended to be used in a vertical run in a shaft or from floor to floor.
Optogain USA. Riser- Riser rated fiber optic cable (NEC 770 OFNR ). Riser is the standard as described in NEC770 for OFNR fiber optic cables and fiber optic patch cords that are intended to be used in a vertical run in a shaft or from floor to floor.
Description: All Systems Broadband Fiber Jumper(FOPC- Fiber Optic Patch Cord), OFNR SM DX(Singlemode Duplex) BIF(Bend Insensitive Fiber), 2mm Blue Jacket w/Green Boots, sc/apc-sc/apc, 5meters; RoHS Compliant; FOPC- Fiber Optic Patch Cord- A fiber optic patch cord is a length of fiber optic cable terminated at both ends with connectors that allow it to be rapidly and conveniently connected to telecommunication equipment. Whether they are called a patch cord, patch cable or fiber jumper cable, they all accomplish the same job. Sm Dx Fiber- Singlemode Duplex Fiber- Singlemode is typically used in long-haul network connections spread out over extended areas--longer than a few miles. For example, telcos use it for connections between switching offices. Singlemode cable features a 9-micron glass core. Duplex cable consists of two fibers, usually in a zipcord (side-by-side) style. Bend Insensitive Fiber- Optical fiber is sensitive to stress, particularly bending. ... An optical "trench" - the term used for a ring of lower index of refraction material - was built into the fiber to basically reflect the lost light back into the core of the fiber. Bend insensitive fiber cable offers greater flexibility in demanding environments than traditional fiber cable. Bend insensitive fiber is typically used in data centers or any space constrained area where tight bends and flexibility are required. OFNR- Optical Fiber Nonconductive Riser- This is a cable consisting of glass fiber with no copper conductive elements. It is generally used for vertical runs between floors. SC/APC-SC-APC Connectors- SC is a type of fiber optic connector with snap (push-pull coupling) coupling type and a 2.5 mm diameter ferrule, which is popularly used in single mode duplex system for its high performance and accurate alignment. APC stands for Angled Polished Connector. This angle prevents back-reflections which will seriously degrade the performance of any analog fiber optic system, such as CATV and Satellite. Sc/apc connectors are green in color. RoHS Compliant- RoHS is a product level compliance based on the European Union's Directive 2002/95/EC, the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS). This fiber is blue in color, with green sc/apc-sc/apc connectors. It is 5 meters long. *Note- This is a new item. Please take a look at the pictures of the item to make sure it is the product you want to purchase. If you have any questions, feel free to contact us for more information. Thank you for your business! Part #ASBJE2R2S77005M(SC/APC-SC/APC 5m) bb New and Used Items: -All Items listed as new and used are eligible for returns within 30 days -Items must be unused(upon receiving item) and in the same condition it was received -All returns must be in original packaging -Customer is responsible for cost of shipping *Items Listed As "For Parts/Not Working" Are Untested And May Work* *Any Items Sold "For Parts/Not Working" or "AS IS" Not Eligible For Returns*
Fiberdyne Labs. OFNR is the designation given by the National Fire Protection Association (NFPA) to interior fiber - optic cables which contain no electrically conductive component, and which are certified for use in Riser applications.
FOPC(Fiber Optic Patch Cord); OS2 B/I 2f Zip(Singlemode Duplex Bi-Directional Fiber) 2mm width;. OS2 B/I 2f Zip- Singlemode cable features a 9-micron glass core. Duplex cable consists of two fibers, usually in a zipcord (side-by-side) style.
GFOPC(Fiber Optic Patch Cord, SM(Singlemode) 9/125, OS2 2F(Duplex), OFNR(Optical Fiber Nonconductive. SM(Singlemode) 9/125, OS2 2F(Duplex)- Singlemode is typically used in long-haul network connections spread out over extended areas--longer than a few miles. ).
Description: Fiberdyne Labs Blue SM Duplex B/I 2.0mm Fiber Optic Patch Cord, OFNR, 15meters; SC/UPC-SC/UPC; Singlemode fiber optic cable has a small core and only one pathway of light. With only a single wavelength of light passing through its core, singlemode realigns the light toward the center of the core instead of simply bouncing it off the edge of the core as with multimode. Singlemode is typically used in long-haul network connections spread out over extended areas--longer than a few miles. For example, telcos use it for connections between switching offices. Singlemode cable features a 9-micron glass core. Duplex- Duplex cable consists of two fibers, usually in a zipcord (side-by-side) style. Use duplex multimode or singlemode fiber optic cable for applications that require simultaneous, bi-directional(B/I- as in this case) data transfer. Workstations, fiber switches and servers, fiber modems, and similar hardware require duplex cable. B/I- Bi-Directionalfiber is fiber that can send and receive signals along the same fiber line, although not at the same time. OFNR- Optical Fiber Nonconductive Fiber- has glass fiber instead of copper conductive elements. It is generally intended for use in vertical runs between floors as part of a fiber backbone. This type of cable complies with Underwriter Laboratories(UL) fire safety test Riser/1666; OFNR cable is used alot in call centers, etc... SC/UPC-SC/UPC Connectors- SC stands for subscriber connector and is a standard-duplex fiber-optic connector with a square molded plastic body and push-pull locking features. SC UPC connector is polished with no angle, which causes difference in light reflection. SC UPC connector adopts an extended polish method to realize finer fiber surface finish, which brings much lower back reflection (ORL) and thus provides much more reliable signal in data center, digital TV and telephone. *Note- This is a new item. Please take a look at the pictures of the item to make sure it is the product you want to purchase. If you have any questions, feel free to contact us for more information, and we will do our best to assist you. Thank you for your business! Part #F921R2GC66015MB-TR(sc/upc-sc/upc) bb New and Used Items: -All Items listed as new and used are eligible for returns within 30 days -Items must be unused(upon receiving item) and in the same condition it was received -All returns must be in original packaging -Customer is responsible for cost of shipping *Items Listed As "For Parts/Not Working" Are Untested And May Work* *Any Items Sold "For Parts/Not Working" or "AS IS" Not Eligible For Returns*
Fiberdyne Labs. Singlemode Duplex-Singlemode fiber optic cable has a small core and only one pathway of light. With only a single wavelength of light passing through its core, singlemode realigns the light toward the center of the core instead of.
Color-coded Dual LC connector on one end and a Dual SC connector on the other end.
